Circulating Electric Lubricator

1.  CEF type is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean.

2.   The timer controls the operation and interval time. The electronic box has operation, interval and abnormal indicators.

3. It has a feed-oil button, press the button and the oil will feed immediately.

4. After installing and connecting the piping, press the “feed-oil button” till the oil flows out, then start to use it.

5.It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines' request.

6.It has a pressure-regulating valve and pressure gauge, where an operator can adjust the pressure and check the pressure easily.

7. It has a float switch that can detect the oil volume. It will have an automatic signal automatically when the oil level is lower than the minimum.

Visitors: 66,922